Trend CRT/MK3 CraftPro Router Table MK3 240v
  • Details
  • Delivery
  • Warranty
  • Our Reviews

Trend CRT/MK3 CraftPro Router Table MK3 240v

The CraftPro Router Table will suit craftsmen & woodworking enthusiasts. It is packed with the necessary features to maximise the versatility of all popular portable routers.

FEATURES

  • Large laminated MDF table
  • Quick release aluminium extrusion back fence with sliding MDF cheeks
  • Removable 6.35mm thick aluminium insert plate with 98mm diameter aperture, pre drilled for Trend TBC routers and T11 routers
  • T11 router Quick Raiser and Quick Release facility
  • High back fence with fully adjustable guard assembly
  • Fully adjustable side finger pressure
  • Full perimeter leg stand with adjustable feet
  • Two insert rings 31.8mm and 67.5mm diameter to reduce table aperture
  • Lead on pin for bearing guided curved work
  • Edge planing facility on back fence of 1.4mm and 2.4mm
  • Cable management clips
  • No volt release switch
  • Mitre fence with zeroing and spelch block facility
  • Bench fixing brackets

COMPATIBILITY

  • Trend: T5 / T5 MK2 / T9 / T10 (240v Only) / T11 (240v Only)
  • Bosch: GOF 1600 A / 1700 ACE
  • CMT: CMT 1E / 2E
  • DeWalt: DW613 / 614 / 615 / 620 / 621 / 624 / 625E (240v Only) / 629 (240v Only)
  • Draper: PT 1200V
  • ELU: MOF 96(E) MK2 / 131 / 177(E) / OF97(E)
  • Makita: RP 0910 / 1110
  • Perles: OF808(E) / 1999

SPECIFICATION

  • Rating: Craftsman
  • Table Top Size: 610 x 405 x 26 mm
  • Bench Height: 410 mm
  • Router Cutter Aperture: 98 mm
  • Max Cutter Diameter: 86 mm
  • Insert Ring Sizes: 31.8 mm / 67.5 mm
  • Backfence Height: 68 mm
  • Dust Spout Aperture: 57 mm
  • Edge Planing (up to): 1.4 & 2.4 mm
  • Weight: 13.6 kg
  • Voltage: 240v
  • Packaged Size: 135 x 730 x 408 mm

Next day deliveries by DPD - 1 hour slot for each delivery
Same day dispatch on orders placed before 3pm*
FREE Delivery available on UK orders over £50**
We deliver to Europe***

*Same day dispatch on all orders placed before 3pm where available and unless notified otherwise

**Free delivery on all orders over £50 (inc VAT) applies to UK Mainland addresses only excluding the Highlands and Islands of the UK. Free 1-3 day delivery service supplied by UK Mail.

We always aim to dispatch all orders placed before 3pm the same day (excluding weekends & bank holidays). We use DPD's next day delivery service and although DPD do not guarantee next day delivery, over 97% of orders are delivered next day.

Saturday / timed deliveries are at an extra cost where available - please note that Saturday delivery is only available on orders placed before 3pm, each Friday.

***Sorry we do not ship to Norway, Malta, Iceland, Switzerland, Canary Islands and any countries outside of Europe.

For full information on available delivery methods, visit out Delivery Options page.

Trend offer a standard 1 year warranty on power tools from date of purchase*

Trend offer an extended 3 year warranty on power tools from date of purchase**

*Unless guarantee card or product packaging advises otherwise
*Valid only if the Guarantee Registration Card is completed and either returned to Trend or registered on line within 28 days of the purchase
**Registration required within 4 weeks of purchase date

Please register via the Trend registration page. On the account management page you can then register your power tool for the warranty extension and print out your warranty certificate. You will need to register each purchased tool separately.

If you need to make a claim under the 3year warranty, you will need the Product Guarantee Certificate together with the original proof of date of purchase. After registration your warranty is simply extended to 3 years from the date of purchase.

For information on what the warranty excludes please click here.

-Trend have a number of stockists situated in the UK that provide a repair service for Trend powertools.
-To locate your nearest Trend Service Agent, please look under the stockist search engine selecting the code TSA. If the tool is within warranty and has not been abused, the TSA will submit a claim form of the completed repair and/or service to Trend with no costs to you the customer.
-If the repair and/or service are out of warranty, the TSA will charge you the customer accordingly. They will advise you of the cost involved prior to proceeding with the repair and/or service. Please visit the Stockist page to enable the location of your nearest TSA outlet.

Contact Trend

Trend Machinery & Cutting Tools Ltd
Odhams Trading Estate
St Albans Road
Watford
Hertfordshire
WD24 7TR
United Kingdom

Tel: 01923 249911

Email: customerservices@trendm.co.uk

Please note you will be required to provide proof of purchase. Please ensure your product is well packaged, enclosed with proof of purchase, note of the fault and return address.

Our reviews

Trend CRT/MK3 CraftPro Router Table MK3 240v

£ 199.00
In Stock - Delivered in 2-3 days
£165.83 (ex VAT)
£199.00
SKU: TRECRT-MK3
EAN: 5027654552360
  • Details
  • Delivery
  • Warranty
  • Our Reviews

Trend CRT/MK3 CraftPro Router Table MK3 240v

The CraftPro Router Table will suit craftsmen & woodworking enthusiasts. It is packed with the necessary features to maximise the versatility of all popular portable routers.

FEATURES

  • Large laminated MDF table
  • Quick release aluminium extrusion back fence with sliding MDF cheeks
  • Removable 6.35mm thick aluminium insert plate with 98mm diameter aperture, pre drilled for Trend TBC routers and T11 routers
  • T11 router Quick Raiser and Quick Release facility
  • High back fence with fully adjustable guard assembly
  • Fully adjustable side finger pressure
  • Full perimeter leg stand with adjustable feet
  • Two insert rings 31.8mm and 67.5mm diameter to reduce table aperture
  • Lead on pin for bearing guided curved work
  • Edge planing facility on back fence of 1.4mm and 2.4mm
  • Cable management clips
  • No volt release switch
  • Mitre fence with zeroing and spelch block facility
  • Bench fixing brackets

COMPATIBILITY

  • Trend: T5 / T5 MK2 / T9 / T10 (240v Only) / T11 (240v Only)
  • Bosch: GOF 1600 A / 1700 ACE
  • CMT: CMT 1E / 2E
  • DeWalt: DW613 / 614 / 615 / 620 / 621 / 624 / 625E (240v Only) / 629 (240v Only)
  • Draper: PT 1200V
  • ELU: MOF 96(E) MK2 / 131 / 177(E) / OF97(E)
  • Makita: RP 0910 / 1110
  • Perles: OF808(E) / 1999

SPECIFICATION

  • Rating: Craftsman
  • Table Top Size: 610 x 405 x 26 mm
  • Bench Height: 410 mm
  • Router Cutter Aperture: 98 mm
  • Max Cutter Diameter: 86 mm
  • Insert Ring Sizes: 31.8 mm / 67.5 mm
  • Backfence Height: 68 mm
  • Dust Spout Aperture: 57 mm
  • Edge Planing (up to): 1.4 & 2.4 mm
  • Weight: 13.6 kg
  • Voltage: 240v
  • Packaged Size: 135 x 730 x 408 mm

Next day deliveries by DPD - 1 hour slot for each delivery
Same day dispatch on orders placed before 3pm*
FREE Delivery available on UK orders over £50**
We deliver to Europe***

*Same day dispatch on all orders placed before 3pm where available and unless notified otherwise

**Free delivery on all orders over £50 (inc VAT) applies to UK Mainland addresses only excluding the Highlands and Islands of the UK. Free 1-3 day delivery service supplied by UK Mail.

We always aim to dispatch all orders placed before 3pm the same day (excluding weekends & bank holidays). We use DPD's next day delivery service and although DPD do not guarantee next day delivery, over 97% of orders are delivered next day.

Saturday / timed deliveries are at an extra cost where available - please note that Saturday delivery is only available on orders placed before 3pm, each Friday.

***Sorry we do not ship to Norway, Malta, Iceland, Switzerland, Canary Islands and any countries outside of Europe.

For full information on available delivery methods, visit out Delivery Options page.

Trend offer a standard 1 year warranty on power tools from date of purchase*

Trend offer an extended 3 year warranty on power tools from date of purchase**

*Unless guarantee card or product packaging advises otherwise
*Valid only if the Guarantee Registration Card is completed and either returned to Trend or registered on line within 28 days of the purchase
**Registration required within 4 weeks of purchase date

Please register via the Trend registration page. On the account management page you can then register your power tool for the warranty extension and print out your warranty certificate. You will need to register each purchased tool separately.

If you need to make a claim under the 3year warranty, you will need the Product Guarantee Certificate together with the original proof of date of purchase. After registration your warranty is simply extended to 3 years from the date of purchase.

For information on what the warranty excludes please click here.

-Trend have a number of stockists situated in the UK that provide a repair service for Trend powertools.
-To locate your nearest Trend Service Agent, please look under the stockist search engine selecting the code TSA. If the tool is within warranty and has not been abused, the TSA will submit a claim form of the completed repair and/or service to Trend with no costs to you the customer.
-If the repair and/or service are out of warranty, the TSA will charge you the customer accordingly. They will advise you of the cost involved prior to proceeding with the repair and/or service. Please visit the Stockist page to enable the location of your nearest TSA outlet.

Contact Trend

Trend Machinery & Cutting Tools Ltd
Odhams Trading Estate
St Albans Road
Watford
Hertfordshire
WD24 7TR
United Kingdom

Tel: 01923 249911

Email: customerservices@trendm.co.uk

Please note you will be required to provide proof of purchase. Please ensure your product is well packaged, enclosed with proof of purchase, note of the fault and return address.

Our reviews

What's in the box

  • 1x CRT/MK3 Router Table
  • 2x Insert Rings
  • 1x No-Volt Release Switch
  • 1x Side Pressure
  • 1x Top Pressure
  • 1x Mitre Fence
  • 1x Lead-On Pin
  • 1x Safety Guard
  • 1x Push Stick

Notes from PTW Expert

Router not included

Not intended for continuous production or production line use

Review

5 4
Average Rating (4 Reviews) See Reviews

Customer reviews

Find out what our customers think

Only registered users can write reviews. Please, log in or register to leave a review.

Trend CRT/MK3 Craftsman router table MK3 240 Volt

Robert Clare

Posted - 13 February 2013

Quick delivery well made piece of kit. Goes together well. Does what is says.

5

Excellent service

Christhoper Farmery

Posted - 6 February 2013

A very good product at the best price on the internet. Sent out next day by courier. Cannot fault Powertool Worlds service, will use them again!

5

excellent service

John Atkinson

Posted - 12 December 2012

Have not used the table yet, but find the build quality far superior
to other tables I have. The prompt service (delivery) etc. has been first class will not hesitate to use Power Tool World in the future.

5
View More