Makita DLX2176TJ 18v Brushless Impact Driver/Combi Drill Twin Kit inc 2x 5.0Ah Batts

Makita DLX2176TJ 18v Brushless Impact Driver/Combi Drill Twin Kit inc 2x 5.0Ah Batteries, Charger and Makpac Carry Case

Two piece MAKDLX2176TJ kit containing the Makita DHP481 Combi Drill and the new Makita DTD154 Impact Driver. Both brushless tools for higher efficiency and reliability, reduced noise, and longer service life. This kit includes 2x BL1850 5.0Ah batteries for the best run times allowing you to get the job done.

CONTENTS

• Makita DHP481 Brushless Combi Drill
• Makita DHP481 Side Handle
• Makita DHP481 Depth Stop
• Makita DHP481 Belt Hook
• Makita DTD154 Brushless Impact Driver
• Makita DTD154 Belt Hook
• 2x Makita BL1850 5.0Ah Batteries
• Makita DC18RC Compact Charger
• Makita Makpac Connector Case Type 3

Makita DHP481 18v Brushless Cordless Combi Drill

FEATURES

• Brushless BLDC motor specially designed to provide, above all, more work amount on a single full battery charge
• Forward/reverse rotation
• Single sleeve keyless chuck allows for easy bit installation/removal by one hand
• Electric brake
• Twin LED job light with afterglow
• 2 mechanical gears
• Battery fuel gauge - 3 lights on = more than 50% battery capacity, 2 lights on = 20 to 50% capacity, 1 light on = less than 20% full battery capacity
• Variable speed control by trigger
• Best possible ergonomic handle for drill-driver applications
• Compact overall length of 205mm
• XPT - Extreme Protection Technology

SPECIFICATION

• Voltage: 18v
• Power Output (W): 640
• Soft Application Max Torque (Nm): 60
• Hard Application Max Torque (Nm): 115
• Torque Settings: 21 + Drill
• Brake Type: Electric
• No. of Gears: 2
• LED Job Light: Yes / Twin / After-glow
• Battery Capacity Indicator: Yes
• Battery Compatibility: 18v Lithium-Ion (LXT)
• Rotation: Forward / Reverse
• Variable Speed Control Trigger: Yes
• No Load Speed (RPM) High: 0-2100
• No Load Speed (RPM) Med: N/A
• No Load Speed (RPM) Low: 0-550
• Chuck Type: 3-Jaw / Single Sleeve Keyless / All Metal
• Chuck Capacity (mm): 13
• Screw Capacity: Machine Screw (mm): 6
• Screw Capacity: Wood Screw (mm): 10 x 90
• Drill Capacity: Concrete (mm): 16
• Drill Capacity: Metal (mm): 13
• Drill Capacity: Wood (mm): 76
• Impact Rate (BPM) High: 0-31500
• Impact Rate (BPM) Med: N/A
• Impact Rate (BPM) Low: 0-8250
• Overall Length (mm): 205
• Net Weight (Approx. Kg) with 1.5/2Ah Batt: 2.5
• Net Weight (Approx. Kg) with 3/4/5Ah Batt: 2.7
• Brushless Motor: Yes

Makita DTD154 18v Brushless Cordless Impact Driver

FEATURES

• eXtreme Protection Technology (XPT) offers maximum protection against dust, debris and liquids for optimal performance in extreme conditions
• 3 stage impact power selection + TEK mode prevents over tightening of fasteners
• Super compact with an overall length of only 117mm
• One touch sliding chuck for easy bit installation and removal
• TEK mode (T-mode) reduces impact power during final stages of fastener seating
• Electronic 3-stage impact power selection (Hard/Medium/Soft)
• Brushless DC motor with high power to weight and size ratio
• Brushless DC motor generates less heat buildup and is ideal for prolonged use in manufacturing / production applications
• Battery protection system provides over-discharge, temperature and current protection for enhanced performance, battery cycle life and overall battery life
• Twin LED job lights with pre-glow and afterglow features
• Ergonomic soft rubber grip design for vibration absorption and comfortable operation

SPECIFICATION

• Voltage: 18v
• Max Torque (Nm): 175
• Brake Type: Electric
• LED Job Light: Yes / Twin / Pre-glow / After-glow
• Battery Capacity Indicator: No
• Battery Compatibility: 18v Lithium-Ion (LXT)
• Rotation: Forward & Reverse
• Variable Speed Control Trigger: Yes / + 3-Stage Impact Power Selection
• No Load Speed (RPM): H: 0-3600 / M: 0-2100 / S: 0-1100
• Machine Screw Capacity: M4-M8
• Standard Bolt Capacity: M5-M16
• High Tensile Bolt Capacity: M5-M14
• Coarse Thread Length Capacity (mm): 22-125
• Max. Impacts Per Minute (ipm): H: 0-3800 / M: 0-2600 / L: 0-1100
• Driving Shank: 1/4" Hex
• Overall Length (mm): 117
• Net Weight (Kg with 1.5/2Ah Battery): 1.2
• Net Weight (Kg with 3/4/5Ah Battery): 1.4
• Brushless Motor: Yes