Wera Safe-Torque A 2 Set Inc Torque Wrench 1/4" Hex Drive x23 Pcs 05075832001

Wera Safe-Torque A 2 Set Inc Torque Wrench 1/4" Hex Drive x23 Pcs 05075832001

The Wera Safe-Torque A 2 Set 05075832001 including a 23-piece 1/4" hex drive torque wrench set in a robust textile box. 

The Wera Safe-Torque A 2 Torque Wrench with a 1/4" hexagon drive is a torque wrench with slide-over mechanism. Once the set torque has been reached, the tool cannot be overtightened, so that excessive torque cannot be applied. Setting range of 2 to 12 Nm for controlled clockwise and counterclockwise torque operation. Easy setting and saving of the default value: The audible and tactile clicks on reaching the scale values facilitate the safe setting of the desired torque value. With Torque Lock function for use as a standard ratchet without torque function.

Max. breaking torque of the 1/4" square head as per DIN 3122. The return angle of only 5° allows the ratchet to be used even in confined spaces and therefore also for applications with angles of rotation.

CONTENTS

• 1x Safe-Torque A 2 torque Wrench With 1/4" Hexagon Drive
• 9x 8790 HMA Zyklop 1/4" Sockets; 1x 5.5 x 23 mm, 1x 6 x 23 mm, 1x 7 x 23 mm, 1x 8 x 23 mm, 1x 9 x 23 mm, 1x 10 x 23 mm, 1x 11 x 23 mm, 1x 12 x 23 mm, 1x 13 x 23 mm
• 1x 870/1 Adaptor 1/4" x 25 mm
• 1x 851/4 Z Bit PH 2x50 mm
• 6x 867/4 Z TORX Bits; 1x TX 10 x 50 mm, 1x TX 15 x 50 mm, 1x TX 20 x 50 mm, 1x TX 25 x 50 mm, 1x TX 27 x 50 mm, 1x TX 30 x 50 mm
• 5x 840/4 Z Bits; 1x 2.5 x 50 mm, 1x 3 x 50 mm, 1x 4 x 50 mm, 1x 5 x 50 mm, 1x 6 x 50 mm
• 1x Hook and Loop Fastener Strip 240 Carry Case 1x 50x240 mm

FEATURES

• Slide-over release mechanism - the set torque can never be overtightened
• Torque Lock function: The torque function can be deactivated and the tool can then be used as a standard ratchet with high loosening moments and for applications with defined angles of rotation
• For controlled clockwise and counterclockwise torque operation - tightening and loosening with or without torque
• Easy setting and saving of the desired torque value with audible and tactile clicks when reaching the scale values
• After the target torque has been reached, the release angle is only 30°
• The fine toothing with 72 teeth allows for a low return angle of 5°
• 1/4" hexagon drive for the use of 1/4" bits 

SPECIFICATION

• Torque (Min.): 2 Nm   
• Torque (Max.): 12 Nm