Trend T11/JT/KIT Jig and Table Quick Release Kit for T11 Router x3
what's in the box
- 3x Cam Levers
- 3x Cam Lever Fixing Screws
- CSK M6 x 40mm Pozi
- 3x Springs
- 3x Wavy Washers
- 3x Half Nut M6 Nyloc
- 3x Steel Bush with Eccentric Bore
- 3x Router Fixing Machine Screw
- CSK M6 x 20mm Pozi
- 3x Altern. Cam Lever Fixing Machine Screw
- Pan M6 x 40mm Slot
- 3x Split Washer M6
- 1x Hole Position Diagram
- 1x Instructions
Notes From PTW Expert
A 2.5mm hex key or nail/pin may be required to act as a tommy bar
Overview
Trend T11/JT/KIT Jig and Table Quick Release Kit for T11 Router x3
This accessory is intended to be used with only a T11 plunge router and router tables such as the Trend PRT router table or as a retro-fit to other suitable accessories to allow the T11 router to be fitted and removed quickly.
The kit can be retro-fitted to certain tables including user made tables or jigs as long as the table surface is no less than 8mm thick and there is sufficient room to turn the cam levers fully.
FEATURES
- Comprises 3 sets of cams, bolts and fixings
- The fixing kit uses three cam levers to lock the router into router tables such as the Trend PRT router table
- The table surface will need to be drilled with suitable size holes in a set pattern
- The metal bushes are manufactured with the centre tapped hole
CONTENTS
- 3x Cam Levers
- 3x Cam Lever Fixing Screws CSK M6 x 40mm Pozi
- 3x Springs
- 3x Wavy Washers
- 3x Half Nut M6 Nyloc
- 3x Steel Bush with Eccentric Bore
- 3x Router Fixing Machine Screw CSK M6 x 20mm Pozi
- 3x Altern. Cam Lever Fixing Machine Screw Pan M6 x 40mm Slot
- 3x Split Washer M6
- 1x Hole Position Diagram
- 1x Instructions
Delivery Options
SHOWING ONLY UK MAINLAND DELIVERY OPTIONS
WE ARE NOT CURRENTLY ABLE TO SHIP TO REPUBLIC OF IRELAND OR EUROPEAN UNION
NEXT DAY DELIVERY - FREE ON ORDERS OVER £100**!
FREE STANDARD DELIVERY AVAILABLE ON UK ORDERS OVER £50*!