Trend SNAP/CS/10TC Trend Snappy TC Drill Countersink 1/8 Drill

Trend SNAP/CS/10TC Snappy TC Drill Countersink 1/8 inch Drill

Drill the pilot hole and countersink in one pass. This Snappy drill countersink pairs a 9.5mm TCT countersink with a replaceable 3.25mm HSS pilot drill, sized for No.10 screws in softwood or No.8 screws in hardwood. The 1/4 inch hex shank makes it a fast swap accessory for clean, consistent finishes.

Features

• 9.5mm diameter countersink for up to 10 gauge imperial screws.
• TCT cutting tips give long life in all timbers and abrasive timber-based materials, including ply, MDF and chipboard.
• Replaceable 3.25mm HSS (high speed steel) pilot drill for No.10 imperial screws in softwood or No.8 screws in hardwood.
• Drill length adjusts easily to suit different timber thicknesses and speed up alignment.
• Cuts countersinks and counterbores. Pair it with Trend Snappy SNAP/PC/95T or SNAP/PC/38 plug cutters to hide fixings.

Specification

• Countersink diameter (D): 9.5mm (3/8 inch)
• Drill diameter (D2): 3.25mm (1/8 inch)
• Shank: 1/4 inch hex
• Screw size, softwood: No.10
• Screw size, hardwood: No.8