Trend C156X1/2TC Profile scriber flat classic set

Trend C156X1/2TC Profile scriber flat classic set

Flat Classic Combination set

The classic method of producing cabinet panelled door and drawer fronts is made easy with these Profile Scriber sets. With the combination type, components are re-arranged on the arbor to cut the profile or the scribe.
Cuts both parts of the joint by reassembly of the tool.
Router table use only. 1/4 inch and 8mm shanks should only be used with a medium or heavy duty router. For certain routers the aperture in the base may need to be enlarged. A workholding device should be used when cutting the scribe cut on the rail ends. The cutting edges should be staggered to each other.

Specification-

D=41 mm
C=17 mm
C2=6.35 mm
B=22 mm
R=3.5 mm
Shank Diameter=1/2 inch

Timber thickness min.=18 mm
Timber thickness max.=22 mm