Trend C076X1/4TC Rounding over 6.3mm rad. x 12.7mm cut

Trend C076X1/4TC Rounding over 6.3mm radius x 12.7mm cut

Bearing Guided Round Over & Ovolo

Self-guiding cutters for rounding over edges do not require a side fence.
They are supplied with two bearings.
Use the larger bearing for a round-over.
If the cutter is lowered, a top quirk can be produced.
Bullnose mouldings can also be produced by taking a second pass from the opposite side of the workpce.

Specification-

D=1 inch
D=25.4 mm
C=1/2 inch
C=12.7 mm
B=9.5 mm
B2=12.7 mm
R=6.3 mm
R=1/4 inch
Shank Diameter=1/4 inch