Trend 46/18X1/2TC Bearing guided ovolo cutter 25.4mm rad.

Trend 46/18X1/2TC Bearing guided ovolo cutter 25.4mm radius

With alternative bearing

Self-guiding cutters for rounding over edges do not require a side fence.
They are supplied with two bearings.
Use the larger bearing for a round-over.
If the cutter is lowered, a top quirk can be produced.
A full round/bullnose for stair treads can also be produced by taking a second pass from the opposite side of the workpce.

Specification-

D=63.5 mm
C=32 mm
B=9.5 mm
B2=12.7 mm
R=25.4 mm
Shank Diameter=1/2 inch