Trend 10/99X1/2TC Mitre lock jointer

Trend 10/99X1/2TC Mitre lock jointer

Mitre lock

Machining of this joint is carried out by routing one pce with the inside face on the table.
The matching corner inside face is machined upright against the fence.
Make sure that the cutter is centred on the workpce. The cutter can also be used for a glue joint, for joining lng.s together.
Ideal for speaker cabinets and drawer construction.
Please note.
These tools cannot be re-sharpened.
Inverted use only.

Specification-

D=68 mm
C=30 mm
C2=12.5 mm
A=45 deg.
Shank Diameter=1/2 inch
Timber thickness min.=15 mm
Timber thickness max.=25 mm