Makita HR4001C SDS Max Rotary Hammer In Carry Case

Makita HR4001C SDS Max Rotary Hammer In Carry Case

The Makita HR4001C SDS Max Rotary Hammer has been developed to surpass competitions in vibration level, operation efficiency and cost-effectiveness. It is equally at home drilling large holes, up to 40mm with a solid drill bit, 105mm with a TCT core bit or fitted with a point or chisel for removing render from the outside of a building or breaking up shallow concrete floors. Packed full of features including 2 lights that are situated on the barrel, one to advise you of power to the motor and a second light to warn you that machine requires a service. The tool is double insulated for increased user safety.

FEATURES

• Soft start
• Low vibration enables prolonged use
• Torque limiter: the drill stops when the bit hits against reinforcements
• Electronic-power-control for greater comfort
• Dual operation mode: rotary hammer and hammer only
• Constant speed under load
• Double insulation
• Comes in either 110V or 240V

SPECIFICATIONS

• Impact Energy: 6.8 J
• Max In Concrete: 40 mm
• Max Core Diameter (TCT): 105 mm
• Blows Per Minute: 1350-2750 bpm
• Input Wattage: 1100 w

VIBRATIONS

• Vibration K factor: 2.5 m/sec²
• No Load Speed: 235 - 480 rpm
• Vibration When Chiselling: 10.5 m/sec²
• Vibration When Hammer Drilling: 12.5 m/sec²
• Noise Sound Pressure: 92 dB(A)
• Noise K Factor: 3 dB(A)
• Noise Sound Power: 103 dB(A)

Available In 110v & 240v