Makita DLX2214TJ 18v Brushless Twin Kit DHP481 Combi & DTD170 Impact Driver inc 2x 5.0Ah Batts

Makita DLX2214TJ 18v LXT Brushless Cordless DHP481 Combi Drill & DTD170 Impact Driver Twin Kit inc 2x BL1850B 5.0Ah Batteries & DC18RC Charger in Makpac Type 3 Carry Case

Makita DLX2214TJ Power Tool Kit 18v brings together two market leading power tools from the professional Makita Power Tool range. This kit includes a DHP481 Combi Drill plus DTD170 Impact Driver powered by 2x 18v 5.0Ah lithium batteries and charger, all packed into a useful MakPac Type 3 Carry Case.

DHP481Z Combi Drill

FEATURES

• Brushless BLDC motor specially designed to provide, above all, more work amount on a single full battery charge
• Forward/reverse rotation
• Single sleeve keyless chuck allows for easy bit installation/removal by one hand
• Electric brake
• Twin LED job light with afterglow
• 2 mechanical gears
• Battery fuel gauge - 3 lights on = more than 50% battery capacity, 2 lights on = 20 to 50% capacity, 1 light on = less than 20% full battery capacity
• Variable speed control by trigger
• Best possible ergonomic handle for drill-driver applications
• Compact overall length of 205mm
• XPT - Extreme Protection Technology

SPECIFICATION

• Voltage: 18v
• Battery Compatibility: 18v Lithium-Ion (LXT)
• Power Output: 640 w
• Soft Application Max Torque: 60 Nm
• Hard Application Max Torque: 115-125 Nm
• Torque Settings: 21 + Drill
• Brake Type: Electric
• No. of Gears: 2
• LED Job Light: Yes / Twin / After-glow
• Battery Capacity Indicator: Yes
• Rotation: Forward / Reverse
• Variable Speed Control Trigger: Yes
• No Load Speed High: 0-2100 rpm
• No Load Speed Low: 0-550 rpm
• Chuck Type: 3-Jaw / Single Sleeve Keyless / All Metal
• Chuck Capacity: 13 mm
• Screw Capacity: Machine Screw: 6 mm
• Screw Capacity: Wood Screw: 10 x 90 mm
• Drill Capacity: Concrete: 16 mm
• Drill Capacity: Metal: 13 mm
• Drill Capacity: Wood: 76 mm
• Impact Rate High: 0-31500 bpm
• Impact Rate Low: 0-8250 bpm
• Overall Length: 205 mm
• Net Weight (Approx) with 1.5/2Ah Batt: 2.5 kg
• Net Weight (Approx) with 3/4/5Ah Batt: 2.7 kg

NOISE & VIBRATION

• Sound Pressure Level (LpA): 85 dB (A)
• Sound Power Level (LWA): 96 dB (A)
• Sound Uncertainty (K): 3 dB (A)
• Drilling Concrete Vibration Emission (ah): 6.5 m/s²
• Drilling Concrete Vibration Uncertainty (K): 1.5 m/s²
• Drilling Metal Vibration Emission (ah): 2.5 m/s²
• Drilling Metal Vibration Uncertainty (K): 1.5 m/s²

DTD170Z Impact Driver

FEATURES

• New impact mode, 'Assist-Mode' drives slowly to start screw before full tightening to eliminate "screw cam-out" and "cross threading“
• TEK mode ('T-mode') reduces impact power during final stages of fastener seating
• Electronic 4-stage impact power selection
• Massive 175 Nm max tightening torque
• More compact body with overall length of just 117mm and lightweight at only 1.5 kg
• Brushless DC motor with high power to weight and size ratio
• Brushless DC motor generates less heat buildup and is ideal for prolonged use in manufacturing / production applications
• One touch sliding chuck for easy bit installation and removal
• Twin LED job lights with pre-glow and afterglow features
• Ergonomic soft rubber grip design for vibration absorption and comfortable operation
• Variable speed control by trigger with electric brake

SPECIFICATION

• Voltage: 18v
• Battery Compatibility: 18v Lithium-Ion (LXT)
• Max Torque: 175 Nm
• Brake Type: Electric
• LED Job Light: Yes / Twin / Pre-glow / After-glow
• Battery Capacity Indicator: Yes
• Rotation: Forward & Reverse
• Variable Speed Control Trigger: Yes / + 4-Stage Impact Power Selection
• No Load Speed:
• Max: 0-3600 / H: 0-3200 / M: 0-2100 / S: 0-1100 rpm
• Machine Screw Capacity: M4-M8
• Standard Bolt Capacity: M5-M16
• High Tensile Bolt Capacity: M5-M14
• Coarse Thread Length Capacity: 22-125 mm
• Max Impacts Per Minute: 4 Stages as below:
• Max: 0-3800 / H: 0-3600 / M: 0-2600 / L: 0-1100 ipm
• Driving Shank: 1/4" Hex
• Overall Length: 117 mm
• Net Weight (with 1.5/2Ah Battery): 1.2 kg
• Net Weight (with 3/4/5Ah Battery): 1.5 kg