Makita DLX2012 18v Combi Drill & Impact Driver Kit inc 2x 3Ah Batts

Makita DLX2012 18v Combi Drill & Impact Driver Kit inc 2x 3Ah Batteries, Charger and Carry Case

This Makita Combi Drill and Impact Driver 18v Kit featuring the DHP456 and the DTD146 includes 2x 3.0Ah Li-ion batteries, charger and a carry case with accessory compartment front, allowing handy storage of the your kit and accessories.

DHP456 Combi Drill

FEATURES

• 22 minute charge time with the air cooled Makstar Optimum Charging System
• 4 pole motor
• Conveniently located push button for forward and reverse
• High comfort grips
• Lithium-ion batteries have greater life spans than their Ni-MH or Ni-Cad counterparts giving 430% greater run time
• Lithium-ion's 40% weight saving means 18 volt power can be obtained by a battery that weighs the same as a 12 volt Ni-MH battery
• Two speed gear box
• Metal gears

SPECIFICATION

• Voltage: 18v
• Soft Application Max Torque (Nm): 36
• Hard Application Max Torque (Nm): 50
• Torque Settings: 16 + Drill
• Brake Type: Electric
• No. of Gears: 2
• LED Job Light: Yes / After-glow
• Battery Capacity Indicator: No
• Battery Compatibility: 18v Lithium-Ion (LXT)
• Rotation: Forward / Reverse
• Variable Speed Control Trigger: Yes
• No Load Speed (RPM) High: 0-1500
• No Load Speed (RPM) Med: N/A
• No Load Speed (RPM) Low: 0-400
• Chuck Type: 3-Jaw / Single Sleeve Keyless
• Chuck Capacity (mm): 13
• Screw Capacity: Machine Screw (mm): 6
• Screw Capacity: Wood Screw (mm): 10 x 89
• Drill Capacity: Concrete (mm): 13
• Drill Capacity: Metal (mm): 13
• Drill Capacity: Wood (mm): 38
• Impact Rate (BPM) High: 0-22500
• Impact Rate (BPM) Med: N/A
• Impact Rate (BPM) Low: 0-6000
• Overall Length (mm): 206
• Net Weight (Approx. Kg) with 1.5/2Ah Batt: 1.6
• Net Weight (Approx. Kg) with 3/4/5Ah Batt: 1.8
• Brushless Motor: No

NOISE & VIBRATION

• Sound Pressure Level (LpA): 81 dB (A)
• Sound Power Level (LWA): 92 dB (A)
• Sound Uncertainty (K): 3 dB (A)
• Drilling Concrete Vibration Emission (ah): 8.0 m/s²
• Drilling Concrete Vibration Uncertainty (K): 1.5 m/s²
• Drilling Metal Vibration Emission (ah): 2.5 m/s²
• Drilling Metal Vibration Uncertainty (K): 1.5 m/s²

DTD146 Impact Driver

FEATURES

• Compact design with a short overall length of 138mm
• One-touch bit installation
• Enhanced dust and drip-proof performance
• LED job light with pre-glow and afterglow functions
• New compact charger
• Compact and lightweight, 4-pole motor

SPECIFICATION

• Voltage: 18v
• Max Torque (Nm): 160
• Brake Type: Electric
• LED Job Light: Yes / Pre-glow & After-glow
• Battery Capacity Indicator: Yes
• Battery Compatibility: 18v Lithium-Ion (LXT)
• Rotation: Forward & Reverse
• Variable Speed Control Trigger: Yes
• No Load Speed (RPM): 0-2300
• Machine Screw Capacity: M4-M8
• Standard Bolt Capacity: M5-M14
• High Tensile Bolt Capacity: M5-M12
• Coarse Thread Length Capacity (mm): 22-125
• Max. Impacts Per Minute (ipm): 0-3200
• Driving Shank: 1/4" Hex
• Overall Length (mm): 138
• Net Weight (Kg with 1.5/2Ah Battery): 1.3
• Net Weight (Kg with 3/4/5Ah Battery): 1.5
• Brushless Motor: No

NOISE & VIBRATION

• Sound Pressure Level (LpA): 93 dB (A)
• Sound Power Level (LWA): 104 dB (A)
• Sound Uncertainty (K): 3 dB (A)
• Vibration Emission (ah) (Using Max Capacity of Tool): 15.5 m/s²
• Vibration Uncertainty (K): 2.0 m/s²