Makita DHP481ZJ 18v LXT Brushless Combi Drill Body Only In Makpac Type 3 Case
The Makita DHP481 LXT combi drill is powered by an 18v Lithium-ion battery and the brushless motor enables up to twice the run-time of traditional motors. This two-speed drill will run up to 2,100rpm in high gear and 550rpm in low. It will deliver 31,500 impacts per minute in high gear and 8,250 impacts per minute in low gear. The 13mm single sleeve keyless chuck enables 16mm capacity in masonry, 13mm in steel and a massive 76mm in timber. Torque can be adjusted to 21 alternative settings and has a dedicated drilling mode. The DHP481 will generate 60Nm of fastening torque (soft joint) and between 115-125Nm (hard joint), the highest torque yet from the Makita 18v range.
There are twin LED job lights with afterglow once the variable speed trigger is released and a new side handle configuration gives light tool control. Coupled with the soft grip ergonomic handle design positive drill-driver capability is assured. It weighs just 2.7kg, and is more compact (20mm shorter) than the previous BHP458 model. Comes packed in Makpac carry case with inlay. Batteries and charger sold separately.
FEATURES
Brushless BLDC motor specially designed to provide, above all, more work amount on a single full battery charge
Forward/reverse rotation
Single sleeve keyless chuck allows for easy bit installation/removal by one hand
Electric brake
Twin LED job light with afterglow
2 mechanical gears
Battery fuel gauge - 3 lights on = more than 50% battery capacity, 2 lights on = 20 to 50% capacity, 1 light on = less than 20% full battery capacity
Variable speed control by trigger
Best possible ergonomic handle for drill-driver applications
Compact overall length of 205mm
XPT - Extreme Protection Technology
SPECIFICATION
Voltage: 18v
Power Output (W): 640
Soft Application Max Torque (Nm): 60
Hard Application Max Torque (Nm): 115-125
Torque Settings: 21 + Drill
Brake Type: Electric
No. of Gears: 2
LED Job Light: Yes / Twin / After-glow
Battery Capacity Indicator: Yes
Battery Compatibility: 18v Lithium-Ion (LXT)
Rotation: Forward / Reverse
Variable Speed Control Trigger: Yes
No Load Speed (RPM) High: 0-2100
No Load Speed (RPM) Med: N/A
No Load Speed (RPM) Low: 0-550
Chuck Type: 3-Jaw / Single Sleeve Keyless / All Metal
Navigating through the elements of the carousel is possible using the tab key. You can skip the carousel or go straight to carousel navigation using the skip links.
Press to skip carousel
Alternative In Stock Products
Navigating through the elements of the carousel is possible using the tab key. You can skip the carousel or go straight to carousel navigation using the skip links.
Press to skip carousel
This is also featured in
Navigating through the elements of the carousel is possible using the tab key. You can skip the carousel or go straight to carousel navigation using the skip links.
Press to skip carousel
Delivery Options
Showing only UK Mainland delivery options WE ARE NOT CURRENTLY ABLE TO SHIP TO REPUBLIC OF IRELAND OR EUROPEAN UNION
Standard Delivery (1-3 Day)
£5.95 or FREE on orders over £50
United Kingdom
Next Day Delivery
£7.95 or £4.95 on orders over £50 or FREE on orders over £100
United Kingdom
Saturday Delivery
£13.99 or £10.99 on orders over £50
United Kingdom
Delivery before 10.30am
£16.99 or £13.99 on orders over £50 (Mon-Fri, working days only)
FREE STANDARD DELIVERY AVAILABLE ON UK ORDERS OVER £50*!
Reviews
>
GBP
product
https://www.powertoolworld.co.uk/makita-dhp481zj-combi-drill-18v-lxt-body-only-in-makpac-type-3-case10983Makita DHP481ZJ Combi Drill 18v LXT Body Only In Makpac Carry Casehttps://www.powertoolworld.co.uk/media/catalog/product/m/a/makdhp481zj1.jpg159.95159.95GBPOutOfStock/Brands/Makita/Makita Drills/Makita Cordless Combi Hammer Drills/Discontinued52326461224508522<h2>Makita DHP481ZJ 18v LXT Brushless Combi Drill Body Only In Makpac Type 3 Case</h2>
<p>The Makita DHP481 LXT combi drill is powered by an 18v Lithium-ion battery and the brushless motor enables up to twice the run-time of traditional motors. This two-speed drill will run up to 2,100rpm in high gear and 550rpm in low. It will deliver 31,500 impacts per minute in high gear and 8,250 impacts per minute in low gear. The 13mm single sleeve keyless chuck enables 16mm capacity in masonry, 13mm in steel and a massive 76mm in timber. Torque can be adjusted to 21 alternative settings and has a dedicated drilling mode. The DHP481 will generate 60Nm of fastening torque (soft joint) and between 115-125Nm (hard joint), the highest torque yet from the Makita 18v range.</p>
<p>There are twin LED job lights with afterglow once the variable speed trigger is released and a new side handle configuration gives light tool control. Coupled with the soft grip ergonomic handle design positive drill-driver capability is assured. It weighs just 2.7kg, and is more compact (20mm shorter) than the previous BHP458 model. Comes packed in Makpac carry case with inlay. Batteries and charger sold separately.</p>
<p><strong>FEATURES</strong></p>
<ul>
<li>Brushless BLDC motor specially designed to provide, above all, more work amount on a single full battery charge</li>
<li>Forward/reverse rotation</li>
<li>Single sleeve keyless chuck allows for easy bit installation/removal by one hand</li>
<li>Electric brake</li>
<li>Twin LED job light with afterglow</li>
<li>2 mechanical gears</li>
<li>Battery fuel gauge - 3 lights on = more than 50% battery capacity, 2 lights on = 20 to 50% capacity, 1 light on = less than 20% full battery capacity</li>
<li>Variable speed control by trigger</li>
<li>Best possible ergonomic handle for drill-driver applications</li>
<li>Compact overall length of 205mm</li>
<li>XPT - Extreme Protection Technology</li>
</ul>
<p><strong>SPECIFICATION</strong></p>
<ul>
<li>Voltage: 18v</li>
<li>Power Output (W): 640</li>
<li>Soft Application Max Torque (Nm): 60</li>
<li>Hard Application Max Torque (Nm): 115-125</li>
<li>Torque Settings: 21 + Drill</li>
<li>Brake Type: Electric</li>
<li>No. of Gears: 2</li>
<li>LED Job Light: Yes / Twin / After-glow</li>
<li>Battery Capacity Indicator: Yes</li>
<li>Battery Compatibility: 18v Lithium-Ion (LXT)</li>
<li>Rotation: Forward / Reverse</li>
<li>Variable Speed Control Trigger: Yes</li>
<li>No Load Speed (RPM) High: 0-2100</li>
<li>No Load Speed (RPM) Med: N/A</li>
<li>No Load Speed (RPM) Low: 0-550</li>
<li>Chuck Type: 3-Jaw / Single Sleeve Keyless / All Metal</li>
<li>Chuck Capacity (mm): 13</li>
<li>Screw Capacity: Machine Screw (mm): 6</li>
<li>Screw Capacity: Wood Screw (mm): 10 x 90</li>
<li>Drill Capacity: Concrete (mm): 16</li>
<li>Drill Capacity: Metal (mm): 13</li>
<li>Drill Capacity: Wood (mm): 76</li>
<li>Impact Rate (BPM) High: 0-31500</li>
<li>Impact Rate (BPM) Med: N/A</li>
<li>Impact Rate (BPM) Low: 0-8250</li>
<li>Overall Length (mm): 205</li>
<li>Net Weight (Approx. Kg) with 1.5/2Ah Batt: 2.5</li>
<li>Net Weight (Approx. Kg) with 3/4/5Ah Batt: 2.7</li>
<li>Brushless Motor: Yes</li>
</ul>
<p><strong>NOISE & VIBRATION</strong></p>
<ul>
<li>Sound Pressure Level (LpA): 85 dB (A)</li>
<li>Sound Power Level (LWA): 96 dB (A)</li>
<li>Sound Uncertainty (K): 3 dB (A)</li>
<li>Drilling Concrete Vibration Emission (ah): 6.5 m/s²</li>
<li>Drilling Concrete Vibration Uncertainty (K): 1.5 m/s²</li>
<li>Drilling Metal Vibration Emission (ah): 2.5 m/s²</li>
<li>Drilling Metal Vibration Uncertainty (K): 1.5 m/s²</li>
</ul>MakitaGBP000088381674836add-to-cartmanufacturer:Makitavoltage:18vwhats_in_the_box:<ul>
<li>1x DHP481 Combi Drill</li>
<li>1x Side Handle</li>
<li>1x Depth Stop</li>
<li>1x Belt Clip</li>
<li>1x Inlay Tray</li>
<li>1x Makpac Type 3 Carry Case</li>
</ul>motor_type:Brushlesstool_type:Combi Hammer Drillwhats_in_the_box_filter:Bare Tool, Carry Casecordless_voltage:18vebay_category:184655