GRABO GRAB106 Replacement Standard Foam Seal For Grabo Pro / Grabo Plus

GRABO GRAB106 Replacement Standard Foam Seal For Grabo Pro / Grabo Plus 

The GRAB106 is a Grabo Standard Seal for both the Grabo Pro and Grabo Plus models. With continuous use, your Grabo seal will start to wear out and become less effective. It is recommended to change the seal at least every six months or sooner with heavy use.

If using the Grabo with any materials under 6mm please swap out the Standard Seal for the Brace Seal.

FEATURES

• Standard Seal
• Robust Foam Seal
• Fits Grabo Pro / Plus
• Leaves no marks

SPECIFICATION

• Material: SBR rubber foam sponge & Silicon Foam
• Colour: Black & Red
• Density: 10.6 Lb/cft (170 kg/mA3) & 40.5 Lb/cft (650 kg/mA3)
• Hardness, Shore C: ~10 +/-2 & 55 +/-5
• Water Absorption, %: <=5 & <=4
• Recommended Storage Temperature: Room temperature