HiKOKI (Hitachi) HiKOKI NR1890DC/J6Z 18v Brushless First Fix 90mm Framing Nailer Body Only In Carry Case

HiKOKI NR1890DC/J6Z 18v Brushless First Fix 90mm Framing Nailer Body Only In Carry Case

The HiKOKI NR1890DC 18V Cordless Paper Tape Nailer accepts 50mm up to 90mm, 30°+/- paper tape strip fasteners (either clipped head or offset round head). At only 4.1 kg (without battery), this cordless framing nailer is well-balanced for less user fatigue.

The on-tool control panel located at the base of the handle centralises the power button, battery charge indicator and selective actuation. To activate the tool, the power button must be depressed for more than 1 second until the green light appears. After 30 minutes of inactivity, the nailer powers off for added safety and to conserve battery power. The battery charge indicator button can be depressed to check the available power in the battery pack, for less downtime. The selective actuation button lets the user quickly select between sequential mode or bump fire mode.

The NR1890DC is equipped with a convenient tool-less depth-of-drive dial that can be easily adjusted to adapt to woods of varying density. The pivoting rafter hooks adds convenience for when the tool is not being used. The ergonomically formed, non-slip rubber grip handle is designed for comfort during extended use. A safety lockout feature is employed as an additional safety measure. In contact mode, when the trigger is pulled, the nailer must be depressed against the intended material within 2 seconds or the trigger will lock. In sequential mode the trigger must be pulled within 2 seconds of depressing the work contact or lock-out will occur. To unlock, the trigger is simply released and then pulled again to resume operation.

Supplied body only in a HiKOKi case. Batteries and chargers are sold separately. 

FEATURES

• Cordless framing nailer with highly efficient brushless motor for longer run time, less maintenance and increased durability
• No air hose or compressor required
• Eliminates the cost of fuel cells
• Air/spring drive system means less recoil, better flush driving and easier maintenance
• High stable driving power allows the nailer to drives nails up to 90mm into lumber with ease
• Selective activation button; easily choose between sequential or bump fire mode
• Tool free adjustment of drive depth
• Lock switch and 30 minute automatic shutdown for increased safety and longer battery life
• Dry fire lockout system prevents nailer from driving when fasteners are low
• Low battery indicator
• Pivoting rafter hook

SPECIFICATION

• Driving System: Air Spring
• Nail Length: 50 - 90mm
• Driving Speed: 1.5 - 2 Nails/Sec (Intermittent)
• Loading Capacity: 47 Nails
• Firing Mode: Full Sequential or Contact
• Dimensions: 342 x 309 x 127 mm
• Weight (exc. Battery): 4.1 kg