Trend LOCK/JIG/B Adjustable Trade Lock Jig

Trend LOCK/JIG/B Adjustable Trade Lock Jig

This Trend Trade Jig with adjustable sliding inserts allows faceplate and mortise recesses for popular size door locks to be routed with a plunge router.

The jig requires a 1/2-inch plunge router with a 80mm plunge, fitted with a 30mm guide bush with 10mm spigot, 12mm diameter long reach cutter and two quick action clamps. A 1/4-inch plunge router can be used for the face plate but will not achieve full depth of mortise.

FEATURES

• Fully adjustable for lock face plate length up to 250mm
• Quick and easy to set up using engraved lines for lock size and door sizes
• Fast, clean & accurate results on doors even in hardwood
• Engraved for 16mm and 19mm lock width and 22.5mm and 25.4mm face plate widths
• Measuring required for other lock widths
• Engraved on underside to allow set up for 35mm, 40mm, 44mm and 54mm door widths
• Deeper mortises can be achieved with a suitable size of auger bit
• Plastic laminate body with aluminium clamping bar, with clamping range 30mm to 80mm
• Includes a pair of setting blocks for specific lock widths and to aid door centring

SPECIFICATION

• Door Thickness Min.: 30 mm
• Door Thickness Max.: 80 mm
• Faceplate Length Min. (OL): 30 mm
• Faceplate Length Max. (OL): 250 mm
• Face Plate Width Engraved Size (D):
• Width: 22.5 mm
• Width: 25.4 mm (1 inch)
• Mortise Width Engraved Size (D):
• Width: 16 mm (5/8 inch)
• Width: 19 mm (3/4 inch)