Trend C079BX1/2TC Rounding over 25.4mm rad. x 32mm cut

Trend C079BX1/2TC Rounding over 25.4mm radius x 32mm cut

Bearing Guided Round Over & Ovolo

Self-guiding cutters for rounding over edges do not require a side fence.
They are supplied with two bearings.
Use the larger bearing for a round-over.
If the cutter is lowered, a top quirk can be produced.
Bullnose mouldings can also be produced by taking a second pass from the opposite side of the workpce.

Specification-

D1=2 1/2 inches
D1=63.5 mm
C=1 1/4 inches
C=32 mm
B=9.5 mm
R1=1 inches
R1=25.4 mm
Shank Diameter=1/2