Trend VJS/CG/AGS VJS/CG adjustable guide stop
  • Details
  • Delivery
  • Returns
  • Warranty
  • Our Reviews

Trend VJS/CG/AGS VJS/CG adjustable guide stop

Varijig clamp guide adjustable guide stop

Varijig clamp guide adjustable guide stop.
A short alloy extrusion rail that can be fixed anywhere along the lng. of the Varijig clamp guide.
The removable alloy adjustable bridge guide stop can be locked in place so that it limits the rail travel in a set position from an edge.
When the bridge guide stop is removed the short rail can be used for stopped housing and grooves that need to stop short of an edge.
Double locking knobs for security.
Ideal for repetitive grooves.
Will also fit Varijig Frame System extrusion.
Varijig clamp guide not included.


Specification-

Extrusion lng.=230mm
Extrusion width=54mm
Extrusion height=15.8mm
Bridge height with knobs=44mm
Bridge travel=176mm
Min set lng.=34mm
Max set lng.=210mm

Next day deliveries by DPD - 1 hour slot for each delivery
Same day dispatch on orders placed before 3pm*
FREE Delivery available on UK orders over £50**
We deliver to Europe***

*Same day dispatch on all orders placed before 3pm where available and unless notified otherwise

**Free delivery on all orders over £50 (inc VAT) applies to UK Mainland addresses only excluding the Highlands and Islands of the UK. Free 1-3 day delivery service supplied by UK Mail.

We always aim to dispatch all orders placed before 3pm the same day (excluding weekends & bank holidays). We use DPD's next day delivery service and although DPD do not guarantee next day delivery, over 97% of orders are delivered next day.

Saturday / timed deliveries are at an extra cost where available - please note that Saturday delivery is only available on orders placed before 3pm, each Friday.

***Sorry we do not ship to Norway, Malta, Iceland, Switzerland, Canary Islands and any countries outside of Europe.

For full information on available delivery methods, visit out Delivery Options page.

Product Returns

Any changes to an order including returns & refunds must be made by the purchaser.

It is possible to overcome this by sending change requests via the purchasing email address.

Returns are the responsibility of the purchaser at own cost with a reputable and traceable method.

Powertoolworld supplies to both Trade and Consumers.

Please select below either if you use the items either for:

Trade - ie in your occupation, for work,in your business etc.

Consumer / Domestic - ie DIY, hobbies etc.

Trend offer a standard 1 year warranty on power tools from date of purchase*

Trend offer an extended 3 year warranty on power tools from date of purchase**

*Unless guarantee card or product packaging advises otherwise
*Valid only if the Guarantee Registration Card is completed and either returned to Trend or registered on line within 28 days of the purchase
**Registration required within 4 weeks of purchase date

Please register via the Trend registration page. On the account management page you can then register your power tool for the warranty extension and print out your warranty certificate. You will need to register each purchased tool separately.

If you need to make a claim under the 3year warranty, you will need the Product Guarantee Certificate together with the original proof of date of purchase. After registration your warranty is simply extended to 3 years from the date of purchase.

For information on what the warranty excludes please click here.

-Trend have a number of stockists situated in the UK that provide a repair service for Trend powertools.
-To locate your nearest Trend Service Agent, please look under the stockist search engine selecting the code TSA. If the tool is within warranty and has not been abused, the TSA will submit a claim form of the completed repair and/or service to Trend with no costs to you the customer.
-If the repair and/or service are out of warranty, the TSA will charge you the customer accordingly. They will advise you of the cost involved prior to proceeding with the repair and/or service. Please visit the Stockist page to enable the location of your nearest TSA outlet.

Contact Trend

Trend Machinery & Cutting Tools Ltd
Odhams Trading Estate
St Albans Road
Watford
Hertfordshire
WD24 7TR
United Kingdom

Tel: 01923 249911

Email: customerservices@trendm.co.uk

Please note you will be required to provide proof of purchase. Please ensure your product is well packaged, enclosed with proof of purchase, note of the fault and return address.

Our reviews

Trend VJS/CG/AGS VJS/CG adjustable guide stop

£ 12.79
In Stock - Delivered in 2-3 days
Notify Me
£10.66 (ex VAT)
£12.79
SKU: TREVJS-CG-AGS
EAN: 5027654555729
  • Details
  • Delivery
  • Returns
  • Warranty
  • Our Reviews

Trend VJS/CG/AGS VJS/CG adjustable guide stop

Varijig clamp guide adjustable guide stop

Varijig clamp guide adjustable guide stop.
A short alloy extrusion rail that can be fixed anywhere along the lng. of the Varijig clamp guide.
The removable alloy adjustable bridge guide stop can be locked in place so that it limits the rail travel in a set position from an edge.
When the bridge guide stop is removed the short rail can be used for stopped housing and grooves that need to stop short of an edge.
Double locking knobs for security.
Ideal for repetitive grooves.
Will also fit Varijig Frame System extrusion.
Varijig clamp guide not included.


Specification-

Extrusion lng.=230mm
Extrusion width=54mm
Extrusion height=15.8mm
Bridge height with knobs=44mm
Bridge travel=176mm
Min set lng.=34mm
Max set lng.=210mm

Next day deliveries by DPD - 1 hour slot for each delivery
Same day dispatch on orders placed before 3pm*
FREE Delivery available on UK orders over £50**
We deliver to Europe***

*Same day dispatch on all orders placed before 3pm where available and unless notified otherwise

**Free delivery on all orders over £50 (inc VAT) applies to UK Mainland addresses only excluding the Highlands and Islands of the UK. Free 1-3 day delivery service supplied by UK Mail.

We always aim to dispatch all orders placed before 3pm the same day (excluding weekends & bank holidays). We use DPD's next day delivery service and although DPD do not guarantee next day delivery, over 97% of orders are delivered next day.

Saturday / timed deliveries are at an extra cost where available - please note that Saturday delivery is only available on orders placed before 3pm, each Friday.

***Sorry we do not ship to Norway, Malta, Iceland, Switzerland, Canary Islands and any countries outside of Europe.

For full information on available delivery methods, visit out Delivery Options page.

Product Returns

Any changes to an order including returns & refunds must be made by the purchaser.

It is possible to overcome this by sending change requests via the purchasing email address.

Returns are the responsibility of the purchaser at own cost with a reputable and traceable method.

Powertoolworld supplies to both Trade and Consumers.

Please select below either if you use the items either for:

Trade - ie in your occupation, for work,in your business etc.

Consumer / Domestic - ie DIY, hobbies etc.

Trend offer a standard 1 year warranty on power tools from date of purchase*

Trend offer an extended 3 year warranty on power tools from date of purchase**

*Unless guarantee card or product packaging advises otherwise
*Valid only if the Guarantee Registration Card is completed and either returned to Trend or registered on line within 28 days of the purchase
**Registration required within 4 weeks of purchase date

Please register via the Trend registration page. On the account management page you can then register your power tool for the warranty extension and print out your warranty certificate. You will need to register each purchased tool separately.

If you need to make a claim under the 3year warranty, you will need the Product Guarantee Certificate together with the original proof of date of purchase. After registration your warranty is simply extended to 3 years from the date of purchase.

For information on what the warranty excludes please click here.

-Trend have a number of stockists situated in the UK that provide a repair service for Trend powertools.
-To locate your nearest Trend Service Agent, please look under the stockist search engine selecting the code TSA. If the tool is within warranty and has not been abused, the TSA will submit a claim form of the completed repair and/or service to Trend with no costs to you the customer.
-If the repair and/or service are out of warranty, the TSA will charge you the customer accordingly. They will advise you of the cost involved prior to proceeding with the repair and/or service. Please visit the Stockist page to enable the location of your nearest TSA outlet.

Contact Trend

Trend Machinery & Cutting Tools Ltd
Odhams Trading Estate
St Albans Road
Watford
Hertfordshire
WD24 7TR
United Kingdom

Tel: 01923 249911

Email: customerservices@trendm.co.uk

Please note you will be required to provide proof of purchase. Please ensure your product is well packaged, enclosed with proof of purchase, note of the fault and return address.

Our reviews

What's in the box

1 x Extrusion 230 mm
1 x Scale
1 x Corner bracket assembly with T-nuts
1 x Alloy bridge guide stop

Notes from PTW Expert

SKU: TREVJS-CG-AGS

Review

0 0
0 ReviewsSee Reviews

Customer reviews

Find out what our customers think

Only registered users can write reviews. Please, log in or register to leave a review.