Trend T10ELK Router 1/2 2000w var 115V & kitbox
Ideal for use by the tradesman in the workshop or on site.
Electronic full wave variable control of spindle speed under load for a fine finish on all types of material.
Soft start eliminates sudden movement of machine on start up.
Two column precision base with large phosphor bronze bushes for plunging accuracy.
Spindle lock and hex collet nut results in easy cutter changes with the 22mm spanner supplied.
Adjustable twin rod parallel side-fence guide with integral micro-adjuster for straight edge work.
Precision machined one-pce multi-slit collet for fail-safe grip of cutter shank.
3-position revolving depth stop for fast adjustable settings.
Adjustable inner plate for guide bush accuracy.
Ideal for site use.
All 115v routers over 1850W require a 32A BS4343 115v plug.
Minimum generator or transformer requirement 3 kVA continuous with a 32A BS4343 115v socket outlet.
115v units cannot be used on the no-volt release switch CRT/L and PRT/L router tables.
Plunge stroke=0-80 mm
Power input=2000 watt
Power ampage=19.0 amp
Standard collet dia.=1/2"
No load speeds=8-20000 rpm
Dust spout size=35 mm
Guide bush dia. supplied=30 mm
Cutter dia. max.=50 mm
Rod diameter=10 mm
Rod centres=100 mm
Other collet dia.=6 mm, 1/4", 8 mm, 3/8", 10 mm & 12 mm
Voltage=115 volt (plug not included)
Sound pressure Lpa=93.0 dB(A)1
Acoustic pressure Lwa=102.0 dB(A)2
Hand arm vibration=<2.5 m/s2
End of life=See below for Environmental Policy link