Trend DG/JIG Draining groove Jig
  • Details
  • Delivery
  • Returns
  • Warranty
  • Our Reviews

Trend DG/JIG Draining groove Jig

For routing draining grooves in solid timber for Belfast type sinks.
Made from 12mm hardwearing CNC machined phenolic.
Provides a 0.5 degree fall.
Grooves at 50mm pitch and 455mm long.
Sight marks for lining up.
Three removable sloping runners for support.
Cutter diameter check hole.
Fixing holes for user made stops for repetition work.


Specification-

Fall=0.5 degree
Groove pitch=50.0 mm
Groove lng.=455 mm
Slat width=19.8 mm
lng.=625 mm
Height=585 mm
Width=12 mm

Next day deliveries by DPD - 1 hour slot for each delivery
Same day dispatch on orders placed before 3pm*
FREE Delivery available on UK orders over £50**
We deliver to Europe***

*Same day dispatch on all orders placed before 3pm where available and unless notified otherwise

**Free delivery on all orders over £50 (inc VAT) applies to UK Mainland addresses only excluding the Highlands and Islands of the UK. Free 1-3 day delivery service supplied by UK Mail.

We always aim to dispatch all orders placed before 3pm the same day (excluding weekends & bank holidays). We use DPD's next day delivery service and although DPD do not guarantee next day delivery, over 97% of orders are delivered next day.

Saturday / timed deliveries are at an extra cost where available - please note that Saturday delivery is only available on orders placed before 3pm, each Friday.

***Sorry we do not ship to Norway, Malta, Iceland, Switzerland, Canary Islands and any countries outside of Europe.

For full information on available delivery methods, visit out Delivery Options page.

Product Returns

Any changes to an order including returns & refunds must be made by the purchaser.

It is possible to overcome this by sending change requests via the purchasing email address.

Returns are the responsibility of the purchaser at own cost with a reputable and traceable method.

Powertoolworld supplies to both Trade and Consumers.

Please select below either if you use the items either for:

Trade - ie in your occupation, for work,in your business etc.

Consumer / Domestic - ie DIY, hobbies etc.

Trend offer a standard 1 year warranty on power tools from date of purchase*

Trend offer an extended 3 year warranty on power tools from date of purchase**

*Unless guarantee card or product packaging advises otherwise
*Valid only if the Guarantee Registration Card is completed and either returned to Trend or registered on line within 28 days of the purchase
**Registration required within 4 weeks of purchase date

Please register via the Trend registration page. On the account management page you can then register your power tool for the warranty extension and print out your warranty certificate. You will need to register each purchased tool separately.

If you need to make a claim under the 3year warranty, you will need the Product Guarantee Certificate together with the original proof of date of purchase. After registration your warranty is simply extended to 3 years from the date of purchase.

For information on what the warranty excludes please click here.

-Trend have a number of stockists situated in the UK that provide a repair service for Trend powertools.
-To locate your nearest Trend Service Agent, please look under the stockist search engine selecting the code TSA. If the tool is within warranty and has not been abused, the TSA will submit a claim form of the completed repair and/or service to Trend with no costs to you the customer.
-If the repair and/or service are out of warranty, the TSA will charge you the customer accordingly. They will advise you of the cost involved prior to proceeding with the repair and/or service. Please visit the Stockist page to enable the location of your nearest TSA outlet.

Contact Trend

Trend Machinery & Cutting Tools Ltd
Odhams Trading Estate
St Albans Road
Watford
Hertfordshire
WD24 7TR
United Kingdom

Tel: 01923 249911

Email: customerservices@trendm.co.uk

Please note you will be required to provide proof of purchase. Please ensure your product is well packaged, enclosed with proof of purchase, note of the fault and return address.

Our reviews

Trend DG/JIG Draining groove Jig

£ 107.94
In Stock - Delivered in 2-3 days
Notify Me
£89.95 (ex VAT)
£107.94
SKU: TREDG-JIG
EAN: 5027654542392
  • Details
  • Delivery
  • Returns
  • Warranty
  • Our Reviews

Trend DG/JIG Draining groove Jig

For routing draining grooves in solid timber for Belfast type sinks.
Made from 12mm hardwearing CNC machined phenolic.
Provides a 0.5 degree fall.
Grooves at 50mm pitch and 455mm long.
Sight marks for lining up.
Three removable sloping runners for support.
Cutter diameter check hole.
Fixing holes for user made stops for repetition work.


Specification-

Fall=0.5 degree
Groove pitch=50.0 mm
Groove lng.=455 mm
Slat width=19.8 mm
lng.=625 mm
Height=585 mm
Width=12 mm

Next day deliveries by DPD - 1 hour slot for each delivery
Same day dispatch on orders placed before 3pm*
FREE Delivery available on UK orders over £50**
We deliver to Europe***

*Same day dispatch on all orders placed before 3pm where available and unless notified otherwise

**Free delivery on all orders over £50 (inc VAT) applies to UK Mainland addresses only excluding the Highlands and Islands of the UK. Free 1-3 day delivery service supplied by UK Mail.

We always aim to dispatch all orders placed before 3pm the same day (excluding weekends & bank holidays). We use DPD's next day delivery service and although DPD do not guarantee next day delivery, over 97% of orders are delivered next day.

Saturday / timed deliveries are at an extra cost where available - please note that Saturday delivery is only available on orders placed before 3pm, each Friday.

***Sorry we do not ship to Norway, Malta, Iceland, Switzerland, Canary Islands and any countries outside of Europe.

For full information on available delivery methods, visit out Delivery Options page.

Product Returns

Any changes to an order including returns & refunds must be made by the purchaser.

It is possible to overcome this by sending change requests via the purchasing email address.

Returns are the responsibility of the purchaser at own cost with a reputable and traceable method.

Powertoolworld supplies to both Trade and Consumers.

Please select below either if you use the items either for:

Trade - ie in your occupation, for work,in your business etc.

Consumer / Domestic - ie DIY, hobbies etc.

Trend offer a standard 1 year warranty on power tools from date of purchase*

Trend offer an extended 3 year warranty on power tools from date of purchase**

*Unless guarantee card or product packaging advises otherwise
*Valid only if the Guarantee Registration Card is completed and either returned to Trend or registered on line within 28 days of the purchase
**Registration required within 4 weeks of purchase date

Please register via the Trend registration page. On the account management page you can then register your power tool for the warranty extension and print out your warranty certificate. You will need to register each purchased tool separately.

If you need to make a claim under the 3year warranty, you will need the Product Guarantee Certificate together with the original proof of date of purchase. After registration your warranty is simply extended to 3 years from the date of purchase.

For information on what the warranty excludes please click here.

-Trend have a number of stockists situated in the UK that provide a repair service for Trend powertools.
-To locate your nearest Trend Service Agent, please look under the stockist search engine selecting the code TSA. If the tool is within warranty and has not been abused, the TSA will submit a claim form of the completed repair and/or service to Trend with no costs to you the customer.
-If the repair and/or service are out of warranty, the TSA will charge you the customer accordingly. They will advise you of the cost involved prior to proceeding with the repair and/or service. Please visit the Stockist page to enable the location of your nearest TSA outlet.

Contact Trend

Trend Machinery & Cutting Tools Ltd
Odhams Trading Estate
St Albans Road
Watford
Hertfordshire
WD24 7TR
United Kingdom

Tel: 01923 249911

Email: customerservices@trendm.co.uk

Please note you will be required to provide proof of purchase. Please ensure your product is well packaged, enclosed with proof of purchase, note of the fault and return address.

Our reviews

What's in the box

1 x Cove cutter
1 x Guide bush (diameter 30mm)

Notes from PTW Expert

SKU: TREDG-JIG

Review

5 1
Average Rating (1 Review) See Reviews

Customer reviews

Find out what our customers think

Only registered users can write reviews. Please, log in or register to leave a review.

Draining groove jig

Paul Hutchings

Posted - 18 April 2012

Buy the best. There is no better. I have tried them all.

5