Trend C074BX1/4TC Rounding over 3.0mm rad. x 9.5mm cut

Trend C074BX1/4TC Rounding over 3.0mm radius x 9.5mm cut

Bearing Guided Round Over & Ovolo

Self-guiding cutters for rounding over edges do not require a side fence.
They are supplied with two bearings.
Use the larger bearing for a round-over.
If the cutter is lowered, a top quirk can be produced.
Bullnose mouldings can also be produced by taking a second pass from the opposite side of the workpce.

Specification-

D=18.7 mm
C=3/8 inch
C=9.5 mm
B=9.5 mm
B2=12.7 mm
R=3.0 mm
Shank Diameter=1/4 inch