Makita DLX2137PMJ 18v Cordless Twin Kit DHP482 Combi & DHR263 SDS+ Hammer Drill inc 4x 4.0Ah Batts

Makita DLX2137PMJ 18v Cordless Twin Kit DHP482 Combi Drill & DHR263 SDS+ Rotary Hammer Drill inc 4x 4.0Ah Batteries, DC18RD Twin Charger, Makpac Type 3 and Makpac Type 4 Carry Cases

Makita DHP482 18v LXT Li-Ion Combi Drill

The new 18V LXT Combi Drill from Makita replaces the DHP456 and is a compact and precise power tool for the professional or DIY enthusiast. It features an all-metal gear construction for extra high transmission durability as well as an electric brake and variable speed control trigger. You will find this an extremely comfortable drill to use with its ergonomic soft grip handle and lightweight design.

FEATURES

• Variable 2-speed, reversible motor
• Incorporates Makita's new battery protection system that provides over-discharge, temperature and circuit protection for enhanced performance, battery cycle life and overall battery life
• Extreme protection technology (XPT) offers maximum protection against dust, debris and liquids for optimal performance in extreme conditions
• 21 clutch settings deliver up to 480 in. Lbs. of torque
• All metal gears for more efficient power transmission
• Ultra-compact design (only 7-3/4" long)
• Twin led jobs light with pre-glow and after-glow functions
• Improved ergonomic soft rubber grip design for vibration absorption and comfortable operation features re-contoured rear grip portion and ribbed grip for improved hold

SPECIFICATION

• Voltage: 18v
• Soft Application Max Torque (Nm): 36
• Hard Application Max Torque (Nm): 62
• Torque Settings: 21 + Drill
• Brake Type: Electric
• No. of Gears: 2
• LED Job Light: Yes / Twin / Pre-glow & After-glow
• Battery Capacity Indicator: No
• Battery Compatibility: 18v Lithium-Ion (LXT)
• Rotation: Forward / Reverse
• Variable Speed Control Trigger: Yes
• No Load Speed (RPM) High: 0-1900
• No Load Speed (RPM) Med: N/A
• No Load Speed (RPM) Low: 0-600
• Chuck Type: 3-Jaw / Single Sleeve Keyless
• Chuck Capacity (mm): 13
• Screw Capacity: Machine Screw (mm): 6
• Screw Capacity: Wood Screw (mm): 10 x 90
• Drill Capacity: Concrete (mm): 13
• Drill Capacity: Metal (mm): 13
• Drill Capacity: Wood (mm): 38
• Impact Rate (BPM) High: 0-28500
• Impact Rate (BPM) Med: N/A
• Impact Rate (BPM) Low: 0-9000
• Overall Length (mm): 198
• Net Weight (Approx. Kg) with 1.5/2Ah Batt: 1.5
• Net Weight (Approx. Kg) with 3/4/5Ah Batt: 1.8
• Brushless Motor: No

Makita DHR263 Twin 18v LXT Li-Ion SDS+ Rotary Hammer

The Makita DHR263 is a 26mm cordless SDS plus rotary hammer drill based on model BHR262 but powered with 2x 18v batteries giving the equivalent power of a 36v machine.

FEATURES

• Powered by two 18V Li-ion batteries in series to supply energy to the powerful 36V DC motor drive system
• Compact design that maintains the same easy handling and high manoeuvrability as the BHR262
• LED Job light with pre-glow and afterglow functions
• 3 mode operation - Rotation + Hammering - Hammering only - Rotation only
• When different capacity batteries are used together, (for example 3.0Ah BL1830 and 4.0Ah BL1840, or fully charged BL1830 and 70% charged BL1830), the machine stops when the battery with less capacity gets empty
• One touch slide chuck for SDS-plus bit
• Ergonomic soft grip
• Battery capacity warning lamp
• 40 different bit-angle settings

SPECIFICATION

• Voltage: 36v (2 x 18v)
• Battery capacity: Up to 5Ah
• Charge Time: 36 minutes for 4Ah, 22 minutes for 3Ah
• Max. in steel: 13mm
• Max. in wood: 32mm
• Max in concrete: 26mm
• No load speed: 0-1,200 rpm
• Impacts per minute: 0-4,800bpm
• Chuck type: SDS+ plus (standard)
• Operation modes: 3 modes
• Net weight: 4.7kg