MAFELL MT55CC PLUNGE CUT SAW SYSTEM WITH 1.6M GUIDE RAIL

Zoom

PTW Price:   £447.52 List Price:   £0.00 Saving Of:   0 (Inc. 17.5% VAT)(£380.87 Exc. VAT) Required Voltage:     240v   110v Model:  MAFMT55CC240 Brand:  Mafell Availability:      Normally despatched in 24/48 Hours The Mafell MT 55CC Plunge Saw is supplied in 240v only. 110v tools will be available April 2009. The MT55 saw is supplied in a systainer.

 MAFELL MT55CC 240VOLT PLUNGE CUT SAW SYSTEM WITH 1.6M GUIDE RAIL

•  All MT 55 features are geared towards precision e.g. tear-free cutting, central locking, fine adjustment of cutting depth, high speed, tracking pointer, adaptable slot, undercutting, position indicator etc.
• Can be used with the most popular track systems - Festool, Makita (including means of eliminating play), and of course MAFEL
• Immediate access to blade: consequently amazingly fast and without teeth being scratched.
• System accessories - From a range of tools, to extensive special accessories for the MT 55 and guide rail F. Saw blades, splinter guard F-SS, non-slip profile F-HP, angle fence F-WA, connecting piece F-VS, stop F-AS (kick back stop), position indicator MT-PA etc.
• Suitable for boards and solid wood
• Scoring function - Precision, tear-free cuts, even if the rubber lip is worn.
• Tracking pointer - Maximum precision, even when cutting free hand.
• Adaptable slot - Can be adapted to other track systems
• Play is eliminated reliably and accurately by index notches on the guide jaws.
• Central locking - Angle setting fixed in two locations with a single screw
• Faster, simpler and more accurate thanks to U-shaped guide rod.
• Position indicator - Useful marking of the point where the blade enters the work piece; an exclusive MAFELL feature
• Practical and precise control of the saw blade as it enters and leaves the work surface.
• Versatile cutting depth pointer - With or without a rail, no need to work out dimensions
• A quick twist of the ingenious pointer – no brainwork required.
• Cutting depth fine adjustment - for extremely fine adjustment of the cutting depth beyond the standard 1 mm accuracy (e.g. Fermacell) taking accuracy and precision to new heights.
• Tilt settings -1° to 48° - Overrides 0° and + 45° positions with automatic system reset, undercuts without the risk of subsequent mistakes caused by forgetting to reset.
• High torque - Comfortable reserves of power, meaning problem-free, convenient cutting, however tough the going.
• No-load speed 6,300 rpm - Out-and-out high cutting speed, producing exact and clean cuts.
• Plexiglas dust protection slide and closed cover - Extremely clean cutting with minimum dust (e.g. gypsum wallboards), no special accessories needed. Clear view of pointer through Plexiglas slide facilitates free-hand cuts.
• Max case with accessory tray - Room for every last small item inside the cleverly designed case, even angle fence F-WA has a proper home.
• Motor and gear noise - Extremely quiet when idling and under load, you can say goodbye to vibration and loud noise.
• Digital electronics - Wear-free: no rotating parts, therefore no unnecessary repair costs.
• Mechanical motor brake - Ideal, as keeps wear to an absolute minimum, electronic solution is subject to much greater wear.
• Hose connector with Velcro tape for mains cable - Hose and cable leave the machine in the same direction and do not obstruct work. Effective cable guide without expensive special accessories.
• Indents on hose connector - Eliminates accidental twisting, hose locator remains in the set position.
• Slot width marker - Clear visibility, Chamfering makes for simple contact.
• Handle at 62° - Ergonomic handle positioning. Convenient and strain-free grip without placing the wrist at an awkward angle.
• Plunge-cutting without a riving knife - Saw blade retracts into guard in next to no time. More flexible saw blade changes without having to pay attention to the riving knife.

---

Specifications:

• Cutting depth 0 - 57 mm
• Cutting depth at 45° 0 - 40,5 mm
• Tilt range -1 bis +48°
• Nominal no-load speed 3600 - 6250 1/min
• Normal load speed 3400 1/min /
• Universal-motor 230 V / 50 Hz
• Nominal input 1400 W
• Weight 4,7 kg
  
• Can be used with the most popular track systems - Festool, Makita (including means of eliminating play), and of course MAFEL
• Immediate access to blade: consequently amazingly fast and without teeth being scratched.
• System accessories - From a range of tools, to extensive special accessories for the MT 55 and guide rail F. Saw blades, splinter guard F-SS, non-slip profile F-HP, angle fence F-WA, connecting piece F-VS, stop F-AS (kick back stop), position indicator MT-PA etc.
• Suitable for boards and solid wood
• Scoring function - Precision, tear-free cuts, even if the rubber lip is worn.
• Tracking pointer - Maximum precision, even when cutting free hand.
• Adaptable slot - Can be adapted to other track systems
• Play is eliminated reliably and accurately by index notches on the guide jaws.
• Central locking - Angle setting fixed in two locations with a single screw
• Faster, simpler and more accurate thanks to U-shaped guide rod.
• Position indicator - Useful marking of the point where the blade enters the work piece; an exclusive MAFELL feature
• Practical and precise control of the saw blade as it enters and leaves the work surface.
• Versatile cutting depth pointer - With or without a rail, no need to work out dimensions
• A quick twist of the ingenious pointer – no brainwork required.
• Cutting depth fine adjustment - for extremely fine adjustment of the cutting depth beyond the standard 1 mm accuracy (e.g. Fermacell) taking accuracy and precision to new heights.
• Tilt settings -1° to 48° - Overrides 0° and + 45° positions with automatic system reset, undercuts without the risk of subsequent mistakes caused by forgetting to reset.
• High torque - Comfortable reserves of power, meaning problem-free, convenient cutting, however tough the going.
• No-load speed 6,300 rpm - Out-and-out high cutting speed, producing exact and clean cuts.
• Plexiglas dust protection slide and closed cover - Extremely clean cutting with minimum dust (e.g. gypsum wallboards), no special accessories needed. Clear view of pointer through Plexiglas slide facilitates free-hand cuts.
• Max case with accessory tray - Room for every last small item inside the cleverly designed case, even angle fence F-WA has a proper home.
• Motor and gear noise - Extremely quiet when idling and under load, you can say goodbye to vibration and loud noise.
• Digital electronics - Wear-free: no rotating parts, therefore no unnecessary repair costs.
• Mechanical motor brake - Ideal, as keeps wear to an absolute minimum, electronic solution is subject to much greater wear.
• Hose connector with Velcro tape for mains cable - Hose and cable leave the machine in the same direction and do not obstruct work. Effective cable guide without expensive special accessories.
• Indents on hose connector - Eliminates accidental twisting, hose locator remains in the set position.
• Slot width marker - Clear visibility, Chamfering makes for simple contact.
• Handle at 62° - Ergonomic handle positioning. Convenient and strain-free grip without placing the wrist at an awkward angle.
• Plunge-cutting without a riving knife - Saw blade retracts into guard in next to no time. More flexible saw blade changes without having to pay attention to the riving knife.

---

Specifications:

• Cutting depth 0 - 57 mm
• Cutting depth at 45° 0 - 40,5 mm
• Tilt range -1 bis +48°
• Nominal no-load speed 3600 - 6250 1/min
• Normal load speed 3400 1/min /
• Universal-motor 230 V / 50 Hz
• Nominal input 1400 W
• Weight 4,7 kg